| Citation: |
YANG Jing-jie, WANG Wei-yong, SHI Yu. STUDY ON LOAD-BEARING CAPACITY OF COLUMNS WITH COLD-FORMED THIN-WALLED STEEL QUADRUPLE-LIMB BUILT-UP BOX-SHAPED SECTION[J]. Engineering Mechanics, 2024, 41(7): 186-201. DOI: 10.6052/j.issn.1000-4750.2022.06.0514
|
The cold-formed steel quadruple-limb built-up box-section column is one type of commonly used composite member, adopted by multi-storey cold-formed thin-walled steel structure buildings to mainly bear compressive concentrated loading. Numerous experimental studies have been carried out to study its ultimate bearing capacity, but there is still a lack of reliable design method, which is not convenient for engineering application. Based on the existing experimental research results, the numerical analysis model is established and verified. The parameter analysis is carried out on the verified numerical model, and the bearing capacity of cold-formed thin-walled steel four limb box section columns with different dimensions and structures are analyzed. Based on the numerical and energy method, the critical loads for both local and overall buckling of built-up columns are calculated respectively. Combined with the direct strength method in American code, the corresponding calculation method of ultimate bearing capacity is proposed. The results show that the modified method proposed has higher accuracy and safety than that utilized in American relative code.
| [1] |
邓露, 钟玉婷, 杨远亮, 等. 冷弯薄壁型钢受弯构件承载力与延性优化研究[J]. 工程力学, 2021, 38(4): 93 − 101. doi: 10.6052/j.issn.1000-4750.2020.05.0327
DENG Lu, ZHONG Yuting, YANG Yuanliang, et al. Optimization on bearing capacity and ductility of cold-formed thin-walled steel flexural member [J]. Engineering Mechanics, 2021, 38(4): 93 − 101. (in Chinese) doi: 10.6052/j.issn.1000-4750.2020.05.0327
|
| [2] |
徐吉民, 幸坤涛, 高向宇, 等. 锈损冷弯薄壁卷边槽钢短柱受压承载力试验研究[J]. 工程力学, 2021, 38(4): 191 − 199, 210. doi: 10.6052/j.issn.1000-4750.2020.06.0376
XU Jimin, XING Kuntao, GAO Xiangyu, et al. Experimental investigation on compressive bearing capacity of cold-formed thin-walled lipped channel short columns with corrosion [J]. Engineering Mechanics, 2021, 38(4): 191 − 199, 210. (in Chinese) doi: 10.6052/j.issn.1000-4750.2020.06.0376
|
| [3] |
叶露, 王宇航, 石宇, 等. 冷弯薄壁型钢框架-开缝钢板剪力墙力学性能研究[J]. 工程力学, 2020, 37(11): 156 − 166. doi: 10.6052/j.issn.1000-4750.2020.01.0005
YE Lu, WANG Yuhang, SHI Yu, et al. Study on the mechanical properties of cold-formed steel framed shear wall with slits [J]. Engineering Mechanics, 2020, 37(11): 156 − 166. (in Chinese) doi: 10.6052/j.issn.1000-4750.2020.01.0005
|
| [4] |
姚行友, 李潇. 冷弯薄壁型钢拼合工字形截面柱畸变屈曲及相关屈曲轴压性能试验与直接强度法研究[J]. 建筑钢结构进展, 2021, 23(12): 33 − 46. doi: 10.13969/j.cnki.cn31-1893.2021.12.004
YAO Xingyou, LI Xiao. Tests and direct strength method on the distortional buckling and interactive buckling of cold-formed thin-walled steel built-up I-section columns under axial compression [J]. Progress in Steel Building Structures, 2021, 23(12): 33 − 46. (in Chinese) doi: 10.13969/j.cnki.cn31-1893.2021.12.004
|
| [5] |
聂少锋, 张洋, 王继琴, 等. 双肢"弓"形高强冷弯薄壁型钢拼合柱受压性能研究[J]. 建筑钢结构进展, 2019, 21(4): 37 − 45,60.
NIE Shaofeng, ZHANG Yang, WANG Jiqin, et al. A study on the compression behavior of duplex high-strength cold-formed steel ∑-shaped built-up column [J]. Progress in Steel Building Structures, 2019, 21(4): 37 − 45,60. (in Chinese)
|
| [6] |
王卫永, 杨竞杰, 徐磊, 等. 冷弯薄壁四肢拼合箱形截面柱抗火性能研究[J]. 建筑结构学报, 2022, 43(8): 133 − 143. doi: 10.14006/j.jzjgxb.2021.0280
WANG Weiyong, YANG Jingjie, XU Lei, et al. Study on fire behavior of cold-formed steel quadruple-limb built-up box-section column [J]. Journal of Building Structures, 2022, 43(8): 133 − 143. (in Chinese) doi: 10.14006/j.jzjgxb.2021.0280
|
| [7] |
杨竞杰, 王卫永. 高温蠕变对冷弯薄壁型钢柱抗火性能的影响[J]. 建筑钢结构进展, 2021, 23(7): 67 − 75. doi: 10.13969/j.cnki.cn31-1893.2021.07.008
YANG Jingjie, WANG Weiyong. The influence of high temperature creep on the fire resistance of cold-formed steel columns [J]. Progress in Steel Building Structures, 2021, 23(7): 67 − 75. (in Chinese) doi: 10.13969/j.cnki.cn31-1893.2021.07.008
|
| [8] |
JGJ/T 421−2018, 冷弯薄壁型钢多层住宅技术标准 [S]. 北京: 中国建筑工业出版社, 2018.
JGJ/T 421−2018, Technical specification for cold-formed thin-wall steel multi-storey residential buildings [S]. Beijing: China Architecture & Building Press, 2018. (in Chinese)
|
| [9] |
YANG J J, WANG W Y, SHI Y, et al. Experimental study on fire resistance of cold-formed steel built-up box columns [J]. Thin-Walled Structures, 2020, 147: 106564. doi: 10.1016/j.tws.2019.106564
|
| [10] |
YANG J J, SHI Y, WANG W Y, et al. Experimental and numerical studies on axially restrained cold-formed steel built-up box columns at elevated temperatures [J]. Journal of Constructional Steel Research, 2020, 171: 106143. doi: 10.1016/j.jcsr.2020.106143
|
| [11] |
MEZA F J, BECQUE J, HAJIRASOULIHA I. Experimental study of the cross-sectional capacity of cold-formed steel built-up columns [J]. Thin-Walled Structures, 2020, 155: 106958. doi: 10.1016/j.tws.2020.106958
|
| [12] |
聂少锋, 周天华, 周绪红, 等. 冷弯薄壁型钢四肢拼合箱形柱轴压性能试验[J]. 长安大学学报(自然科学版), 2017, 37(3): 72 − 81. doi: 10.19721/j.cnki.1671-8879.2017.03.010
NIE Shaofeng, ZHOU Tianhua, ZHOU Xuhong, et al. Experiment on cold-formed steel quadruple-limb built-up box section columns under axial compression [J]. Journal of Chang’an University (Natural Science Edition), 2017, 37(3): 72 − 81. (in Chinese) doi: 10.19721/j.cnki.1671-8879.2017.03.010
|
| [13] |
MEZA F J, BECQUE J, HAJIRASOULIHA I. Experimental study of cold-formed steel built-up columns [J]. Thin-Walled Structures, 2020, 149: 106291. doi: 10.1016/j.tws.2019.106291
|
| [14] |
杜兆宇, 赵一婕, 张其林. 冷弯薄壁四肢组合柱轴压承载力研究[J]. 建筑结构学报, 2014, 35(12): 114 − 120. doi: 10.14006/j.jzjgxb.2014.12.015
DU Zhaoyu, ZHAO Yijie, ZHANG Qilin. Study of axial compression strength of cold-formed thin-walled built-up steel box columns [J]. Journal of Building Structures, 2014, 35(12): 114 − 120. (in Chinese) doi: 10.14006/j.jzjgxb.2014.12.015
|
| [15] |
YANG J J, XU L, SHI Y, et al. Experimental and analytical study of flexural buckling of cold-formed steel quadruple-limb built-up box columns [J]. Journal of Structural Engineering, 2022, 148(1): 04021228. doi: 10.1061/(ASCE)ST.1943-541X.0003193
|
| [16] |
聂少锋, 霍洋洋, 周天华, 等. 冷弯薄壁型钢四肢拼合箱形柱偏压受力性能试验研究与数值分析[J]. 土木工程学报, 2016, 49(10): 1 − 10,17.
NIE Shaofeng, HUO Yangyang, ZHOU Tianhua, et al. Experimental study and numerical analysis on cold-formed thin-walled quadruple-limb built-up box-section columns under eccentric compression [J]. China Civil Engineering Journal, 2016, 49(10): 1 − 10,17. (in Chinese)
|
| [17] |
GB 50018−2002, 冷弯薄壁型钢结构技术规范 [S]. 北京: 中国标准出版社, 2003.
GB 50018−2002, Technical code of cold-formed thin-wall steel structures [S]. Beijing: Standards Press of China, 2003. (in Chinese)
|
| [18] |
AISI S100-16, North American specification for the design of cold-formed steel structural members [S]. Washington: American Iron and Steel Institute, 2016.
|
| [19] |
SCHAFER B W. Review: The direct strength method of cold-formed steel member design [J]. Journal of Constructional Steel Research, 2008, 64(7/8): 766 − 778.
|
| [20] |
SCHAFER B W, PEKÖZ T. Computational modeling of cold-formed steel: Characterizing geometric imperfections and residual stresses [J]. Journal of Constructional Steel Research, 1998, 47(3): 193 − 210. doi: 10.1016/S0143-974X(98)00007-8
|
| [21] |
EL AGHOURY M A, SALEM A H, HANNA M T, et al. Ultimate capacity of battened columns composed of four equal slender angles [J]. Thin-Walled Structures, 2013, 63: 175 − 185. doi: 10.1016/j.tws.2012.07.019
|
| [22] |
POULADI P, RONALDSON J, CLIFTON G C, et al. Finite-element assisted design of eaves joint of cold-formed steel portal frames having single channel-sections [J]. Structures, 2019, 20: 452 − 464. doi: 10.1016/j.istruc.2019.05.009
|
| [23] |
NIE S F, ZHOU T H, EATHERTON M R, et al. Compressive behavior of built-up double-box columns consisting of four cold-formed steel channels [J]. Engineering Structures, 2020, 222: 111133. doi: 10.1016/j.engstruct.2020.111133
|
Supported by: Beijing Renhe Information Technology Co.,Ltd. 
DownLoad: