滕兆春, 王伟斌, 郑文达. 温度影响下Winkler-Pasternak弹性地基上多孔FGM矩形板的自由振动分析[J]. 工程力学, 2022, 39(4): 246-256. DOI: 10.6052/j.issn.1000-4750.2021.02.0152
引用本文: 滕兆春, 王伟斌, 郑文达. 温度影响下Winkler-Pasternak弹性地基上多孔FGM矩形板的自由振动分析[J]. 工程力学, 2022, 39(4): 246-256. DOI: 10.6052/j.issn.1000-4750.2021.02.0152
TENG Zhao-chun, WANG Wei-bin, ZHENG Wen-da. FREE VIBRATION ANALYSES OF POROUS FGM RECTANGULAR PLATES ON A WINKLER-PASTERNAK ELASTIC FOUNDATION CONSIDERING THE TEMPERATURE EFFECT[J]. Engineering Mechanics, 2022, 39(4): 246-256. DOI: 10.6052/j.issn.1000-4750.2021.02.0152
Citation: TENG Zhao-chun, WANG Wei-bin, ZHENG Wen-da. FREE VIBRATION ANALYSES OF POROUS FGM RECTANGULAR PLATES ON A WINKLER-PASTERNAK ELASTIC FOUNDATION CONSIDERING THE TEMPERATURE EFFECT[J]. Engineering Mechanics, 2022, 39(4): 246-256. DOI: 10.6052/j.issn.1000-4750.2021.02.0152

温度影响下Winkler-Pasternak弹性地基上多孔FGM矩形板的自由振动分析

FREE VIBRATION ANALYSES OF POROUS FGM RECTANGULAR PLATES ON A WINKLER-PASTERNAK ELASTIC FOUNDATION CONSIDERING THE TEMPERATURE EFFECT

  • 摘要: 基于经典薄板理论和Hamilton原理研究温度影响下Winkler-Pasternak弹性地基上多孔功能梯度材料(FGM)矩形板的自由振动特性。采用Voigt混合幂率模型和孔隙任意分布模型来表征多孔FGM矩形板的材料属性,并考虑多孔FGM矩形板内部均匀温升和材料具有温度依赖特性;应用物理中面推导弹性地基上多孔FGM矩形板自由振动的控制微分方程并进行无量纲化;采用微分变换法(DTM)对无量纲控制微分方程及其边界条件进行变换,引入典型的六种边界在MATLAB统一编程且保证计算精度一致,经过迭代收敛,求解出无量纲固有频率;通过算例研究了边界条件、梯度指数、升温、孔隙率、长宽比、边厚比、无量纲弹性刚度系数和无量纲剪切刚度系数对多孔FGM矩形板振动特性的影响。

     

    Abstract: Based on the classical thin plate theory and Hamilton principle, the free vibration characteristics of porous functionally graded material (FGM) rectangular plates on a Winkler-Pasternak elastic foundation under the influence of temperature are studied. The Voigt mixed power law model and random distribution model of pores are used to characterize the material properties of porous FGM rectangular plates, and the uniform temperature rise in a porous FGM rectangular plate and the temperature dependency of material properties are considered. The governing differential equation of a porous FGM rectangular plate on the elastic foundation is derived from the physical neutral surface position. The dimensionless form of the governing differential equation is also obtained. The differential transformation method (DTM) is then used to transform the dimensionless governing differential equation and its boundary conditions. Six typical boundaries are introduced and programmed in MATLAB. The calculation accuracy is consistent. After iterative convergence, the dimensionless natural frequencies are solved. The effects of the boundary conditions, gradient index, temperature rise, porosity, aspect ratio, side-to-thickness ratio, dimensionless elastic stiffness coefficient and dimensionless shear stiffness coefficient on the vibration characteristics of FGM rectangular plates are studied by numerical examples.

     

/

返回文章
返回