朱瑞广, 吕大刚. 基于Copula函数的主余震地震动强度参数相关性分析[J]. 工程力学, 2019, 36(2): 114-123. DOI: 10.6052/j.issn.1000-4750.2017.12.0921
引用本文: 朱瑞广, 吕大刚. 基于Copula函数的主余震地震动强度参数相关性分析[J]. 工程力学, 2019, 36(2): 114-123. DOI: 10.6052/j.issn.1000-4750.2017.12.0921
ZHU Rui-guang, LÜ Da-gang. COPULA-BASED CORRELATION ANALYSIS OF INTENSITY MEASURES OF MAINSHOCK-AFTERSHOCK GROUND MOTIONS[J]. Engineering Mechanics, 2019, 36(2): 114-123. DOI: 10.6052/j.issn.1000-4750.2017.12.0921
Citation: ZHU Rui-guang, LÜ Da-gang. COPULA-BASED CORRELATION ANALYSIS OF INTENSITY MEASURES OF MAINSHOCK-AFTERSHOCK GROUND MOTIONS[J]. Engineering Mechanics, 2019, 36(2): 114-123. DOI: 10.6052/j.issn.1000-4750.2017.12.0921

基于Copula函数的主余震地震动强度参数相关性分析

COPULA-BASED CORRELATION ANALYSIS OF INTENSITY MEASURES OF MAINSHOCK-AFTERSHOCK GROUND MOTIONS

  • 摘要: 该文从PEER NGA-West2地震动数据库挑中选出662条主余震地震动,对主震和余震地震动强度参数之间的相关性进行了分析。计算了主震和余震地震动强度参数之间的相关系数,并结合K-S检验以及AIC准则和BIC准则确定了它们的最优概率模型。同时,利用AIC准则和BIC准则确定了主震和余震地震动强度参数之间的最优Copula函数,并基于Copula函数建立了它们之间的联合分布函数。在此基础之上,给出了给定主震地震动参数条件下,余震地震动强度参数的条件分布和条件均值。研究结果表明:在34个所选强度参数中,卓越持时之间的相关性最高;利用Copula函数可以较为精确地建立主震和余震地震动强度参数间的联合分布;给定主震地震动强度参数条件下,Copula条件均值可以用来预测余震地震动强度参数的取值。

     

    Abstract: This study selects 662 mainshock-aftershock (MS-AS) ground motions from PEER NGA-West2 ground motion database, to analyze the correlation of the intensity measures (IMs) among the MS-AS ground motions. The correlation coefficients of these IMs among the MS-AS ground motions are calculated, and their optimal probability models are determined according to the K-S test, the AIC criterion and the BIC criterion. Meanwhile, the AIC criterion and the BIC criterion are used to determine the optimal copula functions among the MS-AS ground motion IMs, and their joint distributions are built based on the copula functions. On this basis, the conditional distribution and the conditional mean of the aftershock ground motion IMs are obtained, given those of the mainshock. The results show that: the significant duration has the highest correlation amongst the 34 selected IMs, the joint distributions can be built using the Copula function with reasonable accuracy, and the Copula conditional mean can be used to predict the IMs of the aftershock ground motions, given the IMs of the mainshock ground motions.

     

/

返回文章
返回