[1] |
Panagiotopoulos E E, Kyparissis S D. CFD transonic store separation trajectory predictions with comparison to wind tunnel Investigations[J]. International Journal of Engineering, 2010, 3(6):538-553.
|
[2] |
Lijewski L E, Suhs N E. Time-accurate computational fluid dynamics approach to transonic store separation trajectory prediction[J]. Journal of Aircraft, 1994, 31(4):886-891.
|
[3] |
Demir H O, Alemdaroglu N. Trajectory calculation of a store released from a fighter aircraft[C]//Reno, Nevada:43rd AIAA Aerospace Sciences Meeting and Exhibit, 2005:1-12.
|
[4] |
Sahu J, Heavey K R, Ferry E N. Computational modeling of multibody aerodynamic interference[J]. Advances in Engineering Software, 1998, 29(3):383-388.
|
[5] |
Yang S Y, Liao W T, Chen Q H. Turbulent study of roll pitch yaw phenomena for a finned store released from a wing regarding different values of angle of attack[J]. Procedia Engineering, 2014, 79:86-93.
|
[6] |
Sickles W L, Denny A G, Nichols R H. Time-accurate CFD predictions for the JDAM separation from an F-18C aircraft[C]//Reno, NV, U.S.A. 37th Aerospace Sciences Meeting and Exhibit. 2000:1-11.
|
[7] |
Anandhanarayanan K, Arora K, Shah V, et al. Separation dynamics of air-to-air missile using a grid-free euler solver[J]. Journal of Aircraft, 2013, 50(3):725-731.
|
[8] |
Anandhanarayanan K, Raj A, Shah V, et al. Separation dynamics of air-to-air missile and validation with flight data[J]. Defence Science Journal, 2018, 68(1):5-11.
|
[9] |
李杰, 纪秀玲, 孙超. 不同释放力组合下小型外挂物投放的数值模拟[J]. 北京理工大学学报, 2010, 30(3):271-274. Li Jie, Ji Xiuling, Sun Chao. Computational studies of light stores separation with various ejector forces[J]. Transactions of Beijing Institute of Technology, 2010, 30(3):271-274. (in Chinese)
|
[10] |
曾铮, 王刚, 叶正寅. RBF整体网格变形技术与多体轨迹仿真[J]. 空气动力学学报, 2015, 33(2):170-177. Zeng Zheng, Wang Gang, Ye Zhengyin. Enhanced RBF mesh deformation method and multi-body trajectory simulation[J]. Acta Aerodynamica Sinica, 2015, 33(2):170-177. (in Chinese)
|
[11] |
王志坚, 伍贻兆, 林敬周. 火箭级间分离喷流干扰数值模拟与风洞试验研究[J]. 空气动力学学报, 2010, 28(2):149-154. Wang Zhijia, Wu Yizhao, Lin Jingzhou. Numerical simulation and wind tunnel test research on rocket stage-separation jet flow interaction[J]. Acta Aerodynamica Sinica, 2010, 28(2):149-154. (in Chinese)
|
[12] |
雷娟棉, 牛健平, 王锁柱, 等. 初始分离条件对航弹与载机分离安全性影响的数值模拟研究[J]. 兵工学报, 2016, 37(2):357-366. Lei Juanmian, Niu Jianping, Wang Suozhu, et al. Numerical simulation about the effect of initial separation condition on safety of aerial bomb separated from an aircraft[J]. Acta Armamentarii, 2016, 37(2):357-366. (in Chinese)
|
[13] |
王金龙, 王浩, 陶如意, 等. 子母弹不同舱段分离流场特性及运动特性研究[J]. 空气动力学学报, 2016, 34(4):490-496. Wang Jinlong, Wang Hao, Tao Ruyi, et al. The movement characteristics analysis of interference flow field on the separation of multi-bay cluster munition[J]. Acta Aerodynamica Sinica, 2016, 34(4):490-496. (in Chinese)
|
[14] |
刘振, 徐敏. 拦截导弹热保护罩分离对红外窗口影响研究[J]. 工程力学, 2011, 28(7):252-256. Liu Zhen, Xu Min. Study on the influence of interceptor missile shroud covers separation to infrared windows[J]. Engineering Mechanics, 2011, 28(7):252-256. (in Chinese)
|
[15] |
闫盼盼, 张群峰, 金明, 等. 内埋武器发射参数对下落轨迹的影响[J]. 工程力学, 2018, 35(1):246-256. Yan Panpan, Zhang Qunfeng, Jin Ming, et al. Effects of launching parameters on the separation trajectory of internal weapons[J]. Engineering Mechanics, 2018, 35(1):246-256. (in Chinese)
|
[16] |
Koomullil R, Cheng G, Soni B, et al. Moving-body simulations using overset framework with rigid body dynamics[J]. Mathematics and Computers in Simulation, 2008, 78(5):618-626.
|
[17] |
黄振贵, 陈志华, 郭玉洁. 尾翼稳定脱壳穿甲弹脱壳动力学过程的三维数值模拟[J]. 兵工学报, 2014, 35(1):9-17. Huang Zhengui, Chen Zhihua, Guo Yujie. Numerical simulation on three-dimensional dynamic process of sabot discarding of APFSDS[J]. Acta Armamentarii, 2014, 35(1):9-17. (in Chinese)
|
[18] |
Huang Z, Wessam M E, Chen Z. Numerical investigation of the three-dimensional dynamic process of sabot discard[J]. Journal of Mechanical Science and Technology, 2014, 28(7):2637-2649.
|
[19] |
Heim E R. CFD wing/pylon/finned store mutual interference wind tunnel experiment[R]. Arnold Engineering Development Center, Tennessee, 1991.
|